Craftsman 706.59668 Tool Storage User Manual


 
I CRAFTSMAN°I
DRAWER AND WORK SURFACE
PARTS REPLACEMENT
SLIDE REPLACEMENT
Tools Required:
Drill
5/32" Drill bit
Rivet gun
Removal
Remove drawer or work surface from
unit. (See drawer and work surface
installation and removal.)
Carefully drill out rivet holding slide
drawer member to drawer or work
surface.
Rotate front of slide drawer member
down and out.
Pull slide forward to remove.
Carefully drill out rivet holding slide
unit member in place.
Pull slide unit member forward to
remove.
Installation
Separate slide drawer member from
unit member. (See drawer and work
surface installation and removal.)
install new slide unit member. (Install
back hanger first.)
Rivet unit member in place as shown.
install drawer member. (Install back
hanger first.)
install rivet to hold slide drawer
member in place.
Reinstall drawer or work surface into
unit. (See drawer and work surface
installation and removal.)
Work Surface
%,
Slide
Drawer
Left side
Slide
Back hanger
place
Rivet
Hanger
pointed up
Drawer
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA
F1613 2