Filter
Top Products
20
Using the Configuration Menu (continued)
Wireless >Access Point>WPA
RADIUS Server 1 IP- Enter the IP address of the RADIUS server in your network.
Port- Enter the port dedicated to the RADIUS server.
Shared Secret- Enter the secret word that devices on the network will input into their
wPA configuration.
RADIUS Server 2 IP (Optional)- If there are two RADIUS servers in your network you will
need to fill out these fields, as above.
TX Rates- Select the transmission rate from the pulldown menu.
Super G- Please refer to page 19 for information about this field.
When you select WPA in the Wireless configuration window, you will configure the
following: