Filter
Top Products
41
Troubleshooting (continued)
Click Device Manager
Select the Hardware tab
Go to Start > My Computer > Properties
If you are using the DWL-G800AP to repeat the wireless signal, check that
the Ethernet MAC address of the wireless router or access point is entered
properly in the settings. Please note that the Repeater function is compatible
with the following D-Link devices:
If you wish to repeat a device that is not a D-Link product, please check the
FAQs for supported products on the D-Link support website (http://
support.dlink.com) to make certain that the device can be repeated by the
DWL-G800AP.
You may be using different network adapters than those illustrated here, but this procedure
will remain the same, regardless of the type of network adapters you are using.
2. The wireless client cannot access the Internet in the Infrastructure
mode (continued).
3. Check that the drivers for the network adapters are installed properly.
D-Link AirPlus Xtreme G
TM
DI-624 Wireless Router - Firmware 2.37
(Rev. C) or newer.
D-Link AirPlus Xtreme G
TM
DWL-2000AP Wireless Access Point -
Firmware 1.56 (Rev. A), 2.06 (Rev. B) or newer.
D-Link AirPlus Xtreme G
TM
DWL-G800AP Wireless Range Extender.
1
2
3