Filter
Top Products
Keypad
17
Table 1. Key Descriptions (cont)
Number Symbol Name & Description
8 Phase Reference
Press to select volts or amps as the display
phase reference. Voltage reference is the
standard configuration. For current only
measurements, press
to set . To
change the power-up phase reference, see
“Power-Up Configuration” later in this manual.
9 Send (Model 41B)
Press to print a test report of calculated
measurements to a printer or PC. (The Tester
displays SEND.) Do not press
when
FlukeView 41 application software is in use. See
“Sending to a PC”.
10 Smooth
Smooth allows you to average waveforms,
resulting in a more stable screen and increased
accuracy of computations. (See “Specifications.”)
Press
four times to step through the
Smooth selections (
2s, 5s, 10s,
20s in the top status line). Pressing a
fifth time returns the Tester to normal operation.