Filter
Top Products
Printing (Model 41B)
43
Printing (Model 41B)
Pressing sends data for the present screen to a printer. Printer type
compatibility is selected on the configuration screen as
Epson or HP.
The Tester displays
PRNT and the following message appears:
* PRINTING *
PRESS ANY KEY TO STOP
Press any key to abort printing; all keys then return to their normal functions.
Sending to a Printer or PC (Model 41B)
Press to start outputting calculated results to the printer or PC. Model
41B stops outputting after it has sent a single set of calculated results. At
9600 baud, the Tester requires a few seconds to output a typical set of
calculated values (1120 bytes).
Note
Do not press
or while printing or using FlukeView 41
software. In either case, pressing
or disrupts
communications.
Using PC Software with the Tester (Model 41B)
FlukeView 41 software is provided for Windows. Refer to the operating
instructions provided with the software.