Filter
Top Products
39/41B
Users Manual
40
4. STORE a waveform set (and associated data) into the boxed memory
location by pressing
. If the location was empty, an underscore now
appears below the memory location number. If the underscore already
existed,
STORE overwrites the old waveform.
CLEAR the selected memory location (waveform and associated data)
from the boxed memory location by pressing
.
RECALL the selected memory location to view the contents directly by
pressing
.
In all three cases, the Tester holds the data represented by the waveform
last seen on the memory screen and returns to the previous display mode.
While Hold is maintained, you can access various representations and
computations about the waveform by selecting different measurement
function and screen mode combinations. You can also send the associated
data to a PC or a printer.
5. Release the memory display and return to the active display mode by
pressing
.
Notes
You can clear all memory locations by holding
pressed while
you press
on.
MAX
,
AVG
, and
MIN
information in the RECORD mode cannot be
stored in a memory location.