Graco 312666R Paint Sprayer User Manual


 
Shutdown
16 312666R
Shutdown
Overnight Shutdown
1. Follow Pressure Relief Procedure, page
17.
2. Leave air turned on and gun detriggered.
3. Unscrew and remove front cover retainer
(C). Remove front cover (U).
4. Using grease gun, dispense a half shot of
grease into fitting (G). Do not over-grease;
use a half shot maximum.
5. Replace front cover (U) and front cover
retainer (C).
Grease gun daily to prevent two-compo-
nent curing and keep fluid passages clean.
Purge air carries grease mist through air
chamber (AC), impingement ports (IP),
and out mix chamber nozzle (N), coating
all surfaces. Use Graco 117773 grease.
F
IG
. 15
!IR
#3,
#3,!IR
&LUID
'REASE
TI12124a
14
AC
IP
N
F
IG
. 16
Always leave a ClearShot Liquid cartridge
in gun handle to prevent cartridge bore
contamination.
TI11335a
N
G
W
U
C