Filter
Top Products
ClearShot Liquid Cartridge Installation/Removal
312666R 23
ClearShot Liquid Cartridge Installation/Removal
Installation
1. Follow Pressure Relief Procedure, page
17.
2. Remove plastic cap from new ClearShot
Liquid cartridge.
3. Insert cartridge into gun handle. Ensure
cartridge tabs are aligned correctly with
cartridge tab recesses in gun handle.
4. After cartridge is fully inserted, turn car-
tridge 1/4 turn clockwise to lock it into gun
handle.
5. Turn air valve ON and prime ClearShot Liq-
uid dosing pump.
a. Trigger gun 20 times to prime dosing
pump.
b. Trigger gun onto cardboard to see
dosed ClearShot Liquid.
6. Resume spraying.
If ClearShot Liquid cartridge removal or
installation is difficult, lubricate cartridge
o-rings and/or cartridge bore with a few
drops of ClearShot Liquid. Water-based
lubricants can be used as well.
Do not use Fusion grease or other petro-
leum- or vegetable-based lubricants. They
will cause cartridge o-rings to swell and
stick inside gun handle.
F
IG
. 30
TI113340a
F
IG
. 31
F
IG
. 32
TI113341a
TI113342a