Filter
Top Products
Maintenance
312666R 29
Clean Passages
If necessary, clean out passages in fluid hous-
ing and handle with drill bits. All drill bits are
available in an accessory kit. Order kit 256526
for ClearShot Handle Drill Kit; see Accesso-
ries, page 55.
Clean Impingement Ports
1. Follow Pressure Relief Procedure, page
17.
2. Disconnect air (D) and remove fluid mani-
fold (M).
3. Flush Gun, page 26. If gun will not flush,
see Mix Chamber and Side Seal Assem-
blies, page 38.
4. Remove Front End, page 36.
F
IG
. 41
TI11330a
M
D