Accessories
Use Only Genuine Grace Parts and Accessories
Air Pressure Verification Kit 224-250
For use in checking air cap pressure at various gun
inlet pressures. Do not use the air cap for spraying.
Assemble the
kit as shown in the drawing below.
Install the air cap on the gun. Turn on the air to the
gun, then actuate the gun and read the resulting air
cap pressure.
The air cap pressure reading
will vary slightly,
depending on the position (rotation) of the air cap on
the gun, but with the inlet atomizing air pressure set
to a maximum of 10 psi (0.7 bar) by air regulator
110-776, the average air cap pressure will be 5.8 psi
(0.4 bar). Gauge accuracy is +I- 2% over the middle
half of the gauge scale, +/- 3% over the remainder of
the gauge scale.
Ref.
No.
1
2
2a 108-294
2b 054-177
2c 11 O-552
2d 104-192
2e 102-730
Part No.
186-862
224-l 87
Description
QW
AIR CAP, tapped
1
GUAGE ASSEMBLY;
Includes items 2a-2e
1
l
CONNECTOR, tube
1
l
TUBE, bulk
(order by length needed)
10 in.
l
CONNECTOR, elbow; l/8 npt(m) 1
l
COUPLING, pipe, l/8 npt(f)
1
l
GAUGE, 0 to 15 psi (0 to 1 bar)
pressure range
1
1O:l Monark Pump 217-523
950 psi (66 bar) Maximum Working Pressure
Wall Bracket 206-220
Cart 208-210
Pump Suction Hose 214-960
Pail Suction Tube 165-787
Drum Suction Tube 206-266
Grounding Clamp And Wire 222-011
12
ga, 25 ft (7.6 m) wire
Brush 101-892
For cleaning gun.
307-947 17