Filter
Top Products
Warnings
WarningsWarnings
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specic
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specic hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
WARNINGWARNING
WARNING
BURNBURN
BURN
HAZARDHAZARD
HAZARD
Equipment surfaces and uid that is heated can become very hot during operation. To avoid
severe burns:
• Do not touch hot uid or equipment.
ELECTRICELECTRIC
ELECTRIC
SHOCKSHOCK
SHOCK
HAZARDHAZARD
HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can
cause electric shock.
• Turn off and disconnect power at main switch before disconnecting any cables and before
servicing or installing equipment.
• Connect only to grounded power source.
• All electrical wiring must be done by a qualied electrician and comply with all local codes
and regulations.
SKINSKIN
SKIN
INJECTIONINJECTION
INJECTION
HAZARDHAZARD
HAZARD
High-pressure uid from dispensing device, hose leaks, or ruptured components will pierce
skin. This may look like just a cut, but it is a serious injury that can result in amputation. GetGet
Get
immediateimmediate
immediate
surgicalsurgical
surgical
treatment.treatment.
treatment.
• Do not point dispensing device at anyone or at any part of the body.
• Do not put your hand over the uid outlet.
• Do not stop or deect leaks with your hand, body, glove, or rag.
• Follow the PressurePressure
Pressure
ReliefRelief
Relief
ProcedureProcedure
Procedure
when you stop dispensing and before cleaning,
checking, or servicing equipment.
• Tighten all uid connections before operating the equipment.
• Check hoses and couplings daily. Replace worn or damaged parts immediately.
334627D3