Filter
Top Products
Warnings
WARNINGWARNING
WARNING
FIREFIRE
FIRE
ANDAND
AND
EXPLOSIONEXPLOSION
EXPLOSION
HAZARDHAZARD
HAZARD
Flammable fumes, such as solvent and paint fumes, in workwork
work
areaarea
area
can ignite or explode. To help
prevent re and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when ammable
fumes are present.
• Ground all equipment in the work area. See GroundingGrounding
Grounding
instructions.
• Use only grounded hoses.
• Hold applicator rmly to side of grounded pail when triggering into pail. Do not use pail
liners unless they are antistatic or conductive.
• StopStop
Stop
operationoperation
operation
immediatelyimmediately
immediately
if static sparking occurs or you feel a shock..
.
Do not use
equipment until you identify and correct the problem.
• Keep a working re extinguisher in the work area.
EQUIPMENTEQUIPMENT
EQUIPMENT
MISUSEMISUSE
MISUSE
HAZARDHAZARD
HAZARD
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the inuence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated
system component. See TechnicalTechnical
Technical
DataData
Data
in all equipment manuals.
• Use uids and solvents that are compatible with equipment wetted parts. See Technical Data
in all equipment manuals. Read uid and solvent manufacturer’s warnings. For complete
information about your material, request MSDS from distributor or retailer.
• Turn off all equipment and follow the PressurePressure
Pressure
ReliefRelief
Relief
ProcedureProcedure
Procedure
when equipment is not in use.
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer’s replacement parts only.
• Do not alter or modify equipment. Alterations or modications may void agency approvals
and create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from trafc areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work area.
• Comply with all applicable safety regulations.
TOXICTOXIC
TOXIC
FLUIDFLUID
FLUID
OROR
OR
FUMESFUMES
FUMES
HAZARDHAZARD
HAZARD
Toxic uids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
• Read MSDSs to know the specic hazards of the uids you are using.
• Store hazardous uid in approved containers, and dispose of it according to applicable
guidelines.
4
334627D