Filter
Top Products
26 308018
Service
Barrel Removal
1. Prepare the gun for service as instructed on page
24.
2. Carefully loosen the nut (14) from the bracket/fluid
fitting (16). Pull the tube (12) out of the fitting.
Make sure both ferrules and the nut stay with the
tube. See Fig. 14.
3. Using the wrench (63) supplied, loosen the three
socket head cap screws (5).
4. Hold the gun handle (7) with one hand and pull the
barrel (3) straight away from the handle to remove
it. See Fig. 15.
CAUTION
To avoid damaging the power supply (18), pull the
gun barrel straight away from the gun handle. If
necessary, gently move the gun barrel from side to
side to free it from the gun handle.
06625
Fig. 14
14
5
63
12
06626
Fig. 15
3
7
18