Filter
Top Products
AAP Series Tip and Air Cap Selection Charts
311052E 31
AAP Series Tip and Air Cap Selection Charts
AAP Series Precision Spray Tips .
* Tips are tested in water.
† Tip sizes include a 150 mesh tip filter
Air Cap
Order desired tip (Part No. AAPxxx) where xxx is
the size code for the chart.
Tips are physically marked with Xxxx, where xxx is
the size code from the chart.
Orifice Size in.
(mm)
* Fluid Output, fl oz/min (lpm)
Maximum Pattern Width at 12 in. (300mm)
Pattern Width Tolerance +/- 0.5 in. (13.0 mm)
at 600 psi
(4.1 MPa, 41 bar)
at 1000 psi
(7.0 MPa, 70 bar)
5
(127)
7
(178)
9
(228)
11
(279)
13
(330)
15
(381)
17
(432)
† 0.009 (0.229) 7.0 (0.2) 9.1 (0.27) 209 309 409 509
† 0.011 (0.279) 10.0 (0.3) 13.0 (0.4) 211 311 411 511 611
0.013 (0.330) 13.0 (0.4) 16.9 (0.5) 213 313 413 513 613 713
0.015 (0.381) 17.0 (0.5) 22.0 (0.7) 215 315 415 515 615 715 815
0.017 (0.432) 22.0 (0.7) 28.5 (0.85) 317 417 517 617 717 817
0.019 (0.483) 28.0 (0.8) 36.3 (1.09) 419 519 619 719
0.021 (0.533) 35.0 (1.0) 45.4 (1.36) 421 521 621
Fluid output (Q) at other pressures (P) can be calculated by this formula: Q = (0.041) (QT)
where QT = fluid output (fl oz/min) from the above table for 600 psi.
P
Application Tip Used With
Typical Air
Consumption Part No.
Standard All AAP, GG4,
GG5, and AAM
Series
3-6 scfm 288194