Filter
Top Products
Accessories
34 311052E
Accessories
Gun Manifolds
Order separately; not included with gun
(See Parts, page 25)
Part No. 288217
North America Manifold with side fluid ports
Part No. 288218
International Manifold with side fluid ports
Part No. 288221
Manifold with bottom fluid ports
Part No. 288224
High Pressure Air Assisted Manifold with side fluid ports
and manual fan adjustment valve
Part No. 24C343
High Pressure Air Assisted Manifold, International
Part No. 288160
Rear port manifold, North America
Part No. 288211
Rear port manifold, International
Needle/Diffuser Options
Needles must be used only with the specified dif-
fuser-seat to guarantee proper seating and life.
• Standard viscosity/standard flow
• Fluid Needle 288191, carbide ball
• Diffuser-Seat 288192, carbide seat
• Acid catalyzed materials/very low viscosity
materials
• Fluid Needle 288190, SST ball
• Diffuser-Seat 288193, plastic seat
HVLP Air Cap Verification Kit 249140
Use to determine air pressure behind the air cap. Do not
use for actual spraying.
Lacquer Air Cap Kit 289080
Kit includes air cap for optimized spray of lacquer mate-
rials.
RAC Gasket 246453
Pack of five standard replacement RAC gaskets.
Acetal RAC Gasket 248936
Pack of five plastic (acetal) replacement RAC gaskets.
Gasket Filter 288201
Optional 100 mesh filter that can be installed in the fluid
inlet gasket (4) for added filtration. Pack of ten.
RAC Conversion Kit 287917
To convert from a gun with standard spray tip, tip guard,
and air cap to Part No. 288053 gun with the AA RAC
assembly. See parts list and drawing below for parts
included with kit.
To be HVLP compliant, the atomizing air pressure
must not exceed 10 psi (70 kPa, 0.7 bar).
Ref.
No. Part No. Description Qty.
1 249478 CAP, air, AA RAC, assy 1
2 15J770 HOUSING, RAC 1
3 LTXxxx TIP, cylinder; tip of choice; includes
item 3a
2
3a SEAT, fluid 1
4 249877 SEAT, diffuser 1
Tip (3) is not included with kit; order separately. See
LTX Series RAC Tip Selection Charts, page 32.
1
2
3a
4
3
TI8126a