Filter
Top Products
Accessories
311052E 35
Air Cap Seal Kit 253032
Pack of five seals and five o-rings for the air cap
assembly.
Plastic Seat Repair Kit 249424
Kit includes replacement plastic seat (pack of ten), and
seat nut.
SST Seat Repair Kit 287962
Kit includes assembled diffuser with SST seat (15H282)
for use with pigmented acid catalyzed materials.
Carbide Seat Repair Kit 249456
Kit includes replacement carbide seat, seat gasket, and
seat nut.
Tip Filter Kit 241804
Replacement filters (pack of ten) for spray tip orifice
sizes 0.007, 0.009, and 0.011.
Grounding Clamp and Wire 222011
In-line Fluid Filter 210500
5000 psi (35 MPa, 350 bar) Maximum Working Pressure
100 mesh. Fits onto the gun's fluid connector. 1/4-18
npsm. Includes the parts shown below.
High Pressure Ball Valves, Fluoroelastomer
Seals
5000 psi (34 MPa, 345 bar) Maximum Working Pressure
Can be used as fluid drain valve.
• 210657 1/2 npt(m)
• 210658 3/8 npt(m)
• 210659 3/8 x 1/4 npt(m)
Bleed-type Master Air Valve
300 psi (2.1 MPa, 21 bar) Maximum Working Pressure
Relieves air trapped in the air line between the pump air
inlet and this valve when closed.
Ultimate Gun Cleaning Kit 15C161
Kit includes brushes and tools for gun maintenance.
Unclogging Needle 249598
Kit includes picks for unclogging gun tip.
Brush 101892
For cleaning the gun.
Retrofit Adapter Plate 288197
The retrofit adapter plate enables the manifold to be
attached to a variety of bolt patterns.
210501
164075
Filter
168517
}
205264
Part No. Description
107141 3/4 npt(m x f) inlet and outlet
107142 1/2 npt(m x f) inlet and outlet