Filter
Top Products
LTX Series RAC Tip Selection Charts
32 311052E
LTX Series RAC Tip Selection Charts
For use with G40 RAC Housing
* Tips are tested in water.
✖ Pattern width measured without airflow.
LTX Reverse-A-Clean (RAC) Spray Tips
• LTX RAC spray tips include a metal fluid seat and rubber fluid seal.
• G40 RAC conversion kits are available. See page 32.
* Included with the LTX RAC spray tip.
† Optional acetal fluid seal 248936 (pack of 5) available.
Orifice Size in. (mm)
* Fluid Output, fl oz/min
(lpm)
at 2000 psi
(14.0 MPa, 140 bar)
✖ Maximum Pattern Width at 12 in. (300 mm)
4 to 6
(150)
6 to 8
(200)
8 to 10
(250)
10 to 12
(300)
12 to 14
(350)
0.009 (0.229) 11.2 (0.33) 209 309
0.011 (0.279) 16.6 (0.49) 211 311 411 511
0.013 (0.330) 23.3 (0.69) 213 313 413 513
0.015 (0.381) 30.8 (0.91) 215 315 415 515 615
0.017 (0.432) 39.5 (1.17) 217 317 417 517 617
0.019 (0.483) 49.7 (1.47) 219 319 419 519 619
0.021 (0.533) 60.5 (1.79) 321 421 521 621
0.023 (0.584) 72.7 (2.15) 423 523 623
0.025 (0.635) 85.9 (2.54) 525 625
0.027 (0.686) 100.0 (2.96) 527 627
0.029 (0.737) 115.6 (3.42) 629
0.031 (0.787) 131.8 (3.90) 531 631
FIG. 23
Housing
* Tip Cylinder
TI8125a
* Fluid
Seat
*†Fluid
Seal
G40 RAC Tip
Guard/Air Cap Assy.