Grizzly G0456 Lathe User Manual


 
G0456 Variable Speed Wood Lathe
-11-
Inventory
After all the parts have been removed from the
crate, you should have the following items:
Inventory Components (Figure
3) Qty
A. Lathe Bed (not shown) ...............................
1
B. Stand Assembly (not shown) .....................
1
C. Sanding Table ............................................ 1
D. L-Brackets ................................................... 2
E. Tool Rest .................................................... 1
F. Spur Center ................................................ 1
G. Live Center ................................................. 1
H. Flat Wrench 1
13
16" ....................................... 1
I. Lock Pin ...................................................... 1
J. Dust Port .................................................... 1
K. Lock Handles .............................................. 2
L. Miter Gauge ................................................ 1
Hardware (not shown) Qty
Hex Bolts
7
16"-14 x
3
4" (L-Brackets) ............ 4
Flat Washers
7
16" (L-Brackets) ................... 4
Lock Washers
7
16" (L-Brackets, Bed) ....... 10
Flat Washers
1
4" (Handles) ........................ 4
Cap Screws
5
16"-18 x
5
8" (Table) ................ 2
Lock Nuts
5
16"-18 (Table) ............................ 2
Flat Washers
5
16" (Table) ........................... 2
Phillips Screws 10-24 x
1
2" (Dust Port) ...... 2
Lock Washers #10 (Dust Port) ...................
2
Cap Screws
7
16"-14 x 1
1
2" (Bed) ................. 6
Hex Wrench 4, 5, 6, 8mm .................1 Each
Open End Wrench 10/12mm ......................
1
Figure 3. Model G0456 inventory components.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi
-
ency, replacements can be obtained at your local
hardware store.
SUFFOCATION HAZARD!
Immediately discard all plastic
bags and packing materials to
eliminate choking/suffocation
hazards for children and
animals.