Filter
Top Products
-14-
G1006/7 Heavy Duty Mill/Drill
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
Items Needed for
Setup
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
Inventory
The Model G1006/G1007 is
a heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment to move
the shipping crate and
remove the machine from
the crate.
The following is a description of the main compo-
nents shipped with your machine.
Crate Contents (Figure 3) Qty
A. Drilling Angle Vise (Not Shown) ................. 1
B. Drill Chuck .................................................. 1
C. R8 Arbor ..................................................... 1
D. Feed Levers with Knobs ............................. 3
E. Plastic Handwheels w/Handles .................. 3
F. Lug Wrench 23mm ..................................... 1
G. Head Crank w/Handle ................................ 1
H. Cap Screw M10-1.5 x 25 (Fly Cutter) ......... 1
I. Fender Washer 10mm (Fly Cutter) ............. 1
J. Fly Cutter .................................................... 1
Description Qty
Figure 3. Inventory.
B
C
D
E
F
G
H
I
J