Filter
Top Products
-28-
G1006/7 Heavy Duty Mill/Drill
SECTION 5: ACCESSORIES
ACCESSORIES
H2689—R-8 Quick Change Collet Set
An affordable quick change collet system with ultra
precision. These spring collets are hardened and
ground to exacting tolerances and offer incredible
holding power. This set includes an R-8 arbor and
nut, spanner wrench, plastic carrying case and
collets sized
1
⁄8",
1
⁄4",
3
⁄8",
1
⁄2",
5
⁄8",
3
⁄4",
7
⁄8", and 1".
What's more, the nut features a self-ejecting rim!
A set like this will truly speed up any tool changing
process. Drawbar size is
7
⁄16" x 20.
Figure 31. H2689 R-8 Quick Change Collet Set.
G9299—10" Yuasa-Type Rotary Table
This high precision rotary table features extra
deep coolant channels, dual positive action locks,
very low profiles, 10 second vernier scales, gear
drives with oil immersion and satin chrome dials.
See the current Grizzly catalog for full specifica-
tions. Features: 4.330" overall height (horizontal),
6.750" height to center hole (vertical), #3 Morse
Taper, 0.465" T-slot width, and 117 lb. approximate
shipping weight.
Figure 32. G9299 10" Yuasa-Type Rotary Table.
G1076—52-PC. Clamping Kit
This clamping kit includes 24 studs, six step block
pairs, six T-nuts, six flange nuts, four coupling
nuts, and six end hold-downs. The rack is slotted
so it can be mounted close to the machine for
easy access.
Figure 33. G1076 52-PC. Clamping Kit.
G9324—Boring Head Combo Set
Hardened and ground adjusting screws along
with a wide base design guarantee a long life and
trouble-free use. Includes a 3" boring head, R-8
shank with 1
1
/2"-18 TPI, and a 12 piece
3
/4" boring
bar set.
Figure 34. G9324 Boring Head Combo Set.