Filter
Top Products
G1023S Series Heavy-Duty 10'' Table Saw -19-
Cleanout Door
The Model G1023S Series comes with a cleanout
door that can accept the optional Model G1838 4"
dust hood. Mount the cleanout door into the
square hole on the lower left side of the saw base
as shown in
Figure 11a
.
Motor Brace
A red motor brace has been installed for shipping
purposes. Remove this brace before continuing
with assembly. The bolts that secure the brace
should be screwed back in at the locations from
which they came.
Figure 11a. Installed cleanout door.
Cleanout Door
Motor Brace
Installed For
Shipping Only!
Figure 11b. Motor brace.