Filter
Top Products
-20- G1023S Series Heavy-Duty 10'' Table Saw
Guard Bracket
Figure 12. Attaching the
5
⁄8"-18 blade guard
mounting shaft.
Figure 13. Blade guard mounting bracket
To install the blade guard assembly:
1.
Thread the
5
⁄8"-18 blade guard mounting
shaft into the mounting location on the back
of the table saw base as shown in Figure
12.
2.
Secure the blade guard mounting shaft with
the included
5
⁄16"-18 hex nut.
3. Slide the loosely assembled bracket onto
the blade guard mounting shaft and tem-
porarily hand tighten the nuts as shown in
Figure 13
.
Blade Guard
Mounting Shaft
Blade Guard
Mounting Bracket