Filter
Top Products
H7761 2" x 27" Belt & 6" Disc Combo Sander
-9-
Wear safety glasses dur-
ing the entire set up pro
-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu
-
al to become familiar with
the controls and opera
-
tions before starting the
machine!
The Model H7761 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con
-
dition of your shipment, you should inventory the
contents.
Unpacking
Set Up Safety
SECTION 3: SET UP
Inventory
After all the parts have been removed from the
box, you should have the following items:
Inventory (Figure
2) Qty
A. Sander Unit ................................................
1
B.
Disc Sanding Table .................................... 1
C.
Miter Gauge ................................................ 1
D. Back Stop ...................................................
1
E. Sanding Table Angle Knobs M6-1.0 x 18 ...
2
F. Flat Washers 6mm .....................................
2
G. Back Stop Adjustment Knob M5-0.8 x 9 ....
1
H. Flat Washer 5mm .......................................
1
I. Hex Nut M5-0.8 ..........................................
1
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi
-
ency, replacements can be obtained at your local
hardware store.
Figure 2. Inventory.
B
C
D
E
F
H
A
G I