Filter
Top Products
-8-
Model T10727 (Mfg. Since 12/12)
SECTION 2: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
Needed for Setup
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Shipping Inventory: (Figure 1) Qty
A. Slip Roll Assembly ..................................... 1
B. Crank Handle ............................................. 1
C. Workpiece Support ..................................... 1
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
• Cleaner/Degreaser (Page 9) ...... As Needed
• Disposable Shop Rags ............... As Needed
• Sturdy Workbench ...................................... 1
• Sturdy Vise Secured to Workbench ........... 1
• Standard Screwdriver #2 ............................ 1
• Hex Wrench 5mm ....................................... 1
Figure 1. Model T10727 shipping inventory.
A
B
C