Filter
Top Products
Model T10727 (Mfg. Since 12/12)
-19 -
SECTION 5: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Any other unsafe condition.
Weekly Maintenance:
• Clean machine.
• Lubricate roller gears.
• Lubricate roller bushings.
Schedule
Cleaning the Model T10727 is relatively easy.
Periodically wipe down the rollers to remove dust
and debris—this ensures rust-promoting material
does not remain on the bare metal surfaces.
Treat all unpainted metal surfaces with quality
metal protectants like SLIPIT
®
, or Boeshield
®
T-9
(see previous page for offerings from Grizzly).
Cleaning &
Protecting
Lubrication
Roller Gears
Lift the gear guard cover and apply a dab of
white lithium grease to the upper roller gear (see
Figure 25). Rotate the hand crank several times
in both directions to distribute the grease to both
gears, then wipe away any excess and close the
cover.
Roller Bushings
Use an oil can to apply a few drops of light
machine oil to the brass bushings at the either
end of the three rollers (see Figure 26). Rotate
the hand crank several times in both directions to
distribute the oil, then wipe away any excess.
Lubricating the Model T10727 Slip Roll consists
of periodically (depending upon usage) apply-
ing grease to the roller gears and oil to the roller
bushings.
Figure 25. Upper roller gear exposed.
Gear Guard
Cover
Upper Roller
Gear
Figure 26. Roller bushings
(one on either end of each roller).
Upper
Roller
Bushing
Lower
Roller
Bushing
Rear
Roller
Bushing