Filter
Top Products
-2-
Model T10727 (Mfg. Since 12/12)
INTRODUCTION
The Model T10727 is a 12" slip roll that mounts
in a sturdy bench-mounted vise instead of being
directly fastened to a workbench. This provides
you with the strength and stability you need when
forming sheet metal—without sacrificing precious
workbench space or requiring time-consuming
setups before operating.
The slip roll has three specially positioned metal
rollers to make bends, cones, and cylinders from
sheet metal. The rollers have grooves at one end
that also allow wire to be rolled into various circles
or curves.
The slip roll has a hand crank on one end that
the operator uses to rotate the rollers as they
feed the sheet metal into the slip roll. Two sets of
adjustment knobs allow the operator to adjust the
spacing distance between certain rollers to either
control the radius of ends or accommodate vary-
ing thicknesses of sheet metal or wire.
Machine Description
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
contained inside. Sometimes we make mistakes,
but
our policy of continuous improvement
also
means that
sometimes the machine
you receive
will be slightly different than what is shown in
the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure
, check our website
for an updated version. W
e post current
manuals
and
manual updates for free on our website at
www.grizzly.com
.
Alternatively, you can call our Technical Support
for help. Before calling, please write down the
Manufacture Date
and Serial Number
stamped
into the machine ID label (see below). This infor-
mation helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info