Page 4SKU 97181 For technical questions, please call 1-800-444-3353.
Electrical safety2.
The Plug on this Belt/Disc Sander a.
must match the outlet. Never modify
the plug in any way. Do not use
any adapter plugs with grounded
power tools. Unmodied plugs and
matching outlets will reduce risk of
electric shock.
Avoid body contact with grounded b.
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
Do not expose this Belt/Disc c.
Sander to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use d.
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the
risk of electric shock.
When operating this Belt/Disc e.
Sander outdoors, use an extension
cord suitable for outdoor use. Use
of a cord suitable for outdoor use
reduces the risk of electric shock.
Personal safety3.
Stay alert, watch what you are a.
doing and use common sense when
operating this Belt/Disc Sander. Do
not use a power tool while you are
alcohol or medication. A moment
of inattention while operating power
tools may result in serious personal
injury.
Use safety equipment. Always b.
wear ANSI-approved safety
goggles with full face shield
protection. Safety equipment
such as dust mask/respirator,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will reduce
personal injuries.
Avoid accidental starting. Ensure c.
the switch is in the off-position
before plugging in. Carrying power
tools with your nger on the switch
or plugging in power tools that have
the switch on invites accidents.
Remove any adjusting key or wrench d.
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper e.
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose f.
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry
or long hair can be caught in moving
parts.
If devices are provided for the g.
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use
of these devices can reduce dust-
related hazards.
Power tool use and care4.
Do not force this Belt/Disc Sander. a.
Use the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
Do not use this Belt/Disc Sander if b.
the switch does not turn it on and
off. Any power tool that cannot