Honeywell 6110 Saw User Manual


 
3-12
Dolphin 6110 Technical Specifications
Operating System Microsoft Windows Embedded Handheld 6.5
Development
Environment
Honeywell SDK for Windows Embedded Handheld 6.5
Application Software Honeywell Power Tools and Demos
Processor TI OMAP3715 800MHz
Memory 512 MB RAM X 512 MB Flash
Expansion Memory User accessible Micro SD memory card slot with SDIO support. Please check current
price guide for available qualified card options.
Display 240x320. 262.144 Color Transmissive TFT
Backlight LED
Engine 56XX 2D imager engine with laser aimer or N4313-TTL 1D laser engine
Keypad 28-key shifted alpha numeric with backlit keys
Voice communication Voice-over-IP and Push-to-Talk ready
Audio Built-in microphone and speaker, stereo headset jack
Communication
Interface
High-speed USB 2.0 (480 Mbps) from cradle (or I/O cable); RS232 (115 Kbps) from
cradle.
Battery 2200mAh - Li-ion battery 3.7V
3300mAh - Li-Ion battery 3.7V (includes extended battery door)
Expected Hours of
Operation
2200mAh battery pack: 10 hours
(with scan every 2 seconds)
Battery life varies with application and use case
.
Charging 5V/2A input through bottom access or USB/Serial connector
Expected Charge Time 2200mAh / 8.1Wh - 6 hours for a fully depleted battery
3300mAh / 12.2Wh - 9 hours for a fully depleted battery
Charging Peripherals AC wall adapter and Charger (KSAS0100500200D5)/Communication Cable
HomeBase–single-bay terminal charge/communicate
eBase–single-bay terminal charge/communicate (via Ethernet connection)
Quad Charger–four-slot battery pack charger (DSA-0421S-03 1)
WPAN Bluetooth Class II (10 m) v2.1 Enhanced Data Rate (EDR) with on-board antenna. BQB
certified
WLAN Dual Mode 802.11a/b/g/n (11 Mbps/54 Mbps) with internal antenna