Honeywell 6110 Saw User Manual


 
1-2
N4313-TTL Safety & RF Approvals by Country:
* Does not apply to N4313-TTL laser engine.
R&TTE Compliance Statement—802.11a/b/g/n and/or Bluetooth
Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC).
This product is marked with in accordance with the Class II product requirements specified
in the R&TTE Directive, 1999/5/EC. The equipment is intended for use throughout the European
Community; PAN European Frequency Range: 2.402–2.480 GHz.
Restrictions for use in France are as follows:
Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz
Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power
(EIRP*) of 10 mW for the 2.454–2.483 GHz band.
Frequency band 5180-5320 MHz is restricted to indoor use only.
The CE Mark on the product indicates that the system has been tested to and conforms with the
provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/
EC Low Voltage Directive. Honeywell shall not be liable for use of our product with equipment (i.e.,
power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low
Voltage Directive.
For further information, contact:
Hand Held Products Europe B.V.
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
Warning! To prevent possible hearing damage, do not listen at high volume levels for long periods.
Country Safety RF (Radio)
U.S.A. UL60950-1 FCC Part 15, Sub part B, Sub
part C, Sub part E
Canada* C-UL CSA C22.2 No. 60950-1-07 ICES-003, RSS 210
European
Community
IEC 60825-1:2007
IEC62471:2008
EN60950-
1:2006+A11:2009+A1:2010+A12:2011
EN55022 (CISPR 22) Class B
EN55024:2010
EN300 328
EN300 440-2
EN301 489-1
EN301 489-17
EN301 893
EN62311
EN62209-2
China CCC SRRC
Mexico NOM-019 NOM-121
!
0984