Filter
Top Products
6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a Model 720HD Heavy-Duty Mortiser. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number................................................................................................................................720HD
Stock Number.............................................................................................................................. 1791309
Chuck Capacity (in.)..............................................................................................................................1/2
Spindle Taper ................................................................................................................................... JT33
Bushing Inside Diameter (in.)..........................................................................................3/4, 5/8 and 1-1/8
Chisel Stroke (in.)..............................................................................................................................6-1/8
Maximum Chisel Travel (in.):
Side to Side....................................................................................................................................9-1/8
Front to Back..................................................................................................................................3-3/8
Table Size (L x W)(in.) ......................................................................................................... 14-5/8 x 7-1/8
Maximum Workpiece Height – without Table (in.)...................................................................................46
Maximum Workpiece Height – with Table (in.)..................................................................................11-1/2
Clamp Surface (L x W)(in.)........................................................................................................... 8 x 2-3/4
Table Tilt (deg.) ..................................................................................................................90 left, 45 right
Fence Size (L x W)(in.) ...................................................................................................... 20-1/2 x 11-3/4
Base Size (L x W)(in.)........................................................................................................ 25-1/2 x 21-1/2
Overall Height (in.).................................................................................................................................80
Motor...........................................................................................................TEFC, 1.5HP, 1Ph, 230V only
Motor Speed (RPM).......................................................................................................................... 1,720
Approximate Shipping Weight (lbs.) .....................................................................................................575
Approximate Net Weight (lbs.) ............................................................................................................. 490
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.