Filter
Top Products
C-1
ACCESSORIES
C-1
OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Twist-Mate Cable Connectors
1 – standard for Ground Clamp
1 – Gas Pass through for Tig Torch
Strap Packet
Instruction Manual
Field Installed
K857 - Remote Output Control - For Stick welding.
When the V205-Tʼs Output Control is in the
"REMOTE" position, this portable current control pro-
vides the same range as the current control on the
welder. Consists of a 6-pin Amphenol connector which
plugs into the remote control Amphenol. 25 foot cable
length.
K870 - Foot Amptrol
tm
for TIG welding. When the
V205-Tʼs Output Control is in the “REMOTE” position,
the foot Amptrol energizes the output and controls the
output remotely. The Foot Amptrol connects directly
to the 6 pin Amphenol.
K963-3 - Hand Amptrol
tm
for TIG welding. When the
V205-Tʼs Output Control is in the “Remote” position,
the hand Amptrol energizes the output and controls
the output remotely. The Hand Amptrol connects
directly to the 6 pin Amphenol.
K814 - Arc Start Switch - Energizes the output for
TIG welding if remote output control of the amperage
is not desired. It allows on/off TIG welding at the cur-
rent set by the Current Control on the control panel.
When using the Arc Start Switch set the Output
Control to the “LOCAL” position.
Magnum® PTA-9 and PTA-17 TIG Torches -
The
following standard Magnum® TIG torches with one-
piece cable may be used with the Invertec V205-T.
• K1781-1 PTA-9 12.5 ft medium back cap
• K1781-3 PTA-9 25 ft medium back cap
• K1782-1 PTA-17 12.5 ft long back cap
• K1782-3 PTA-17 25 ft long back cap
NOTE: Each torch requires a Twist-Mate™ adapter,
(one is included with the machine). Collets, collet bod-
ies, and nozzles are not included and must be ordered
separately.
TIG TORCH KITS
K2266-1 – TIG-Mate 17 Air Cooled TIG Torch
Starter Pack. One complete easy-to-order kit pack-
aged in its own portable carrying case. Includes: PTA-
17 torch, parts kit, Harris flowmeter/regulator, 10 ft.
gas hose, Twist-Mate™ adapter, work clamp and
cable.
K2267-1 – TIG-Mate 20 Water-Cooled TIG Torch
Starter Pack. One complete easy-to-order kit pack-
aged in its own portable carrying case. Includes:
PTW-20 torch, parts kit, Harris flowmeter/regulator, 10
ft. gas hose, Twist-Mate™ adapter, work clamp and
cable, and 10 ft. water hose.
K2413-1- TIG-Mate 9 Air Cooled TIG Torch Starter
Pack. One complete easy-to-order Kit packaged in its
own portable carring case. Includes: PTA-9 Torch,
Gas Lens Parts Kit, Harris flowmeter/regulator, 10 Ft.
gas hose, Twist-Mate™ adapter, work clamp and
cable.
CABLE PLUGS
K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches
to welding cable to provide quick disconnect from
machine.
Twist-Mate Torch Adapter K1622-1 - One is shipped
with the welder torch. If you do not care to interchange
this part between torches
(one is required to connect
Magnum PTA-9 or PTA-17 TIG torches with one-piece
cable to the V205-T)
you may order an additional
adapters. The quick connect plug provides connection
for both gas and welding current.
K1622-4 – Twist-Mate adapter for Water-Cooled
TIG torches. Adapter for PTW-18 and -20 Torches.
TIG Torch Parts Kits - Parts kits are available for the
PTA-9 and PTA-17 TIG torches. These kits include
back cap, collets, collet bodies, nozzles and tung-
stens.
Order KP507 for PTA-9 torches
Order KP508 for PTA-17 torches
Order KP2414-1 Gas Lens Parts kit for PTA-9 torches
See publication E12.150 for parts kits breakdown.
Cut Length Consumables - TIG welding filler metals
are available for welding stainless steel, mild steel,
aluminum and copper alloys. See publication C9.10.
V205-T DC & V205-T AC/DC TIG