Filter
Top Products
RANGER® 10,000 & RANGER® 10,000 PLUS
ACCESSORIES
C-3 C-3
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit - For Stick Welding. Includes 35 ft (10.7m).
• 2/0 AWG electrode cable, 30 ft. (9.1m)
• 2/0 AWG work cable with lugs, headshield, filter plate, work
clamp, and electrode holder. 400 amp capacity.
K875 Accessory Kit - For stick welding. Includes 20 Ft. (6.1m).
#6 electrode cable with lug, 15 Ft. (4.6m) #6 work cable with
lugs, headshield, filter plate, work clamp, and electrode holder
and sample pack of mild steel electrode. 150 amp capacity.
WIRE FEED
K449 LN-25 - Includes internal contactor for across the
arc operation (no control cable). Provides “cold” elec-
trode until gun trigger is pressed. Includes gas sole-
noid.
K1870-1 LN-15 Across the Arc
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum 350 Innershield Gun (for LN-25, LN-
15).
K1802-1 Magnum 300 MIG Gun (for LN-25, includes
Connector Kit).
K470-2 Magnum 300 MIG Gun (for LN-15, requires
K466-10 Magnum Gun Connector Kit).
K1500-1 Gun Receiver Bushing (for LN-15, K126-2)
Note: See Wire Feeder IM Manual for appropriate
Drive Roll & Guide Tube Kits.
TIG WELDING
K1783-9- PTA-26V TIG Torch.
KP509- Magnum Parts Kit and Argon gas.
K930-2- TIG Module.
Required TIG Equipment:
K938-1 Connector Kit
K936-4 Control Cable
K814 Arc Start Switch
Optional TIG Equipment:
K939-1 Docking Kit
K937-45 Control Cable Extension
K844-1 Water Valve Kit
PLASMA CUTTING:
K1580-1- Pro-Cut 55 (Requires full KVA Adapter
K1816-1).
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC