Filter
Top Products
Circuit diagram
Wiring diagram
P 10/10
Protective tube
(Varnish tetron tube)
Terminal block
LED Job light
Field
Switch
Fig. D-4
Fig. D-3
Power supply cord
5008MGA (with electric brake)
Motor housing
Handle
Black
White
Red
Color index of lead wires' sheath
Orange
Yellow
Switch
rib
Protective tube
LED Job light
[A] If Power supply cord is equipped with a string loop,
put the loop around the ribs as illustrated below
before putting Terminal block in place.
[B] Bend the terminals of Switch as illustrated below
so that they do not touch the rib and the wall of
Handle.
Put Protective tube in this portion.
Fix two lead wires (red)
to LED Job light with
this lead wire holder.
Route Field lead wire (yellow)
between the rib and the wall of Handle.
When fixing lead wires with this lead
wire holder, fix LED lead wires (red) first,
then Field lead wires (black, yellow, orange).
Terminal block
[A]
rib
string loop
Power supply cord
[B]
[B]
Switch
terminal
Pull out Field lead wires (orange)
from this portion.
black/brown
white/blue