Filter
Top Products
P 2/10
[2] LUBRICATION
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Safety Cover
Apply Makita grease N. No.1 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion.
[1] NECESSARY REPAIRING TOOLS
Blade case complete Gear room for Helical gear 47 (Apply approximately 6g.)
Repair
32
32
DISASSEMBLING
Fig. 2 Fig. 3
1) Remove Pan head screw M6x20 and Rubber sleeve 6.
(Fig. 1)
2) Remove Retaining ring S-42 with 1R003. (Fig. 2)
3) Remove Torsion spring 4 and Safety cover
from Blade case.
Then remove Spacer from Bearing box. (Fig. 3)
Retaining ring S-42
1R003
1R003
1R004
1R008
1R045
1R208
1R229
1R316
Retaining ring S pliers ST-2N Removing/installing Retaining ring S-42 from/on Spindle
Removing/installing Bearing retainer from/on Bearing box
Removing Spindle from Bearing box
Removing Spindle from Helical gear 47
Removing Hex socket head bolt M5x40 from the hinge portion of
Angular guide
Squaring Saw blade to Base plate
Pulling off Sleeve 6 from the hinge portion of Angular guide
(modular use with 1R004)
Retaining ring S pliers ST-2
Tips for retaining ring pliers (90 degrees)
Gear extractor (large)
1R041
Fixing Bearing box section in vise
Vise plate
1R269
Removing Ball bearing 608LLB from Spindle
Bearing extractor
90-degree Set square
1/4" Hex shank bit for M5
Adjustable bearing retainer wrench
1R236 Round bar for arbor 7-100
Code No. Description Use for
Item No. Description Portion to lubricate
CAUTION: Unplug the machine and remove the saw blade from the machine for safety
before repair/ maintenance in accordance with the instruction manual!
Tension spring 4
Safety cover
Spacer
Bearing box
Blade case
Fig. 1
Rubber sleeve 6
Safety Cover
Pan head screw M6x20
Retaining ring S-42