Filter
Top Products
[1] NECESSARY REPAIRING TOOLS
783201-2
1R228
1R268
Hex. wrench 3 (standard equipment)
1/4" Hex. shank bit for M4
Spring pin extractor M3
screwing / unscrewing Hex socket head bolt and M3x4 Pan head screw
1R266 Spring pin extractor M2
1R254 Torque wrench shaft 2-6N.m
134873-0 Bit adapter
1R220 Ratchet head 9.5
1R222 Socket adapter
disassembling magazine section
DescriptionCode No. Use for
Fig. 1
Molybdenum disulfide
lubricant
Compression spring 17
Rail Grooves of both sides where Hammer slides
Spur gear 27
(3pcs.)
89
89 Cam block Portion that contacts 66 Spur gear 55 complete
67 Plane bearing 10 Inside surface that contacts 64 Spur gear 7 complete
64
61
59
13
11
Guide bolt Shaft surface except thread portion13
Spring holder
Hammer
Holder
34
13
Screw to with Loctite 272 put on the thread.
59 DC motor Pinion gear
61 Internal gear 69 Teeth that engages with Spur gear 27
64
Spur gear 7 complete
Teeth that engages with the lower gear
of 66 Spur gear 55 complete
66 Spur gear 55 complete
Teeth
Pin and cam portions
Item No. Description Portion to lubricate Lubricant
67
66
11
: Makita grease N No.2
: Molybdenum disulfide lubricant
Makita grease N No.2
a little
a littleLoctite 272
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Amount
Adhesive
Amount
: Loctite 272
LUBRICANT
Item No. Description
M6 Hex nut
34
34
Portion to apply adhesive
Thread
ADHESIVE
Apply the following lubricants to protect parts and product from unusual abrasion.
Apply the following adhesive.
[2] LUBRICANT AND ADHESIVE APPLICATION
Repair
P 2/ 15