Filter
Top Products
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Spring section (cont.)
ASSEMBLING
Hook portion of
Hammer
Hook portion
of Hammer
Flat washer 4
Bind PT3x16 Tapping screw
Bind PT3x16
Tapping screw
Spring section
Spring section
Roller portion of
Spur gear 55
(1) Take the reverse steps of the disassembling procedure for Spring section.
(2) Fix Spur gear 55 complete with Flat washer 4 and Bind PT3x16 Tapping screw.
Install Spring section in Housing L while adjusting Roller position of Spur gear 55 complete
to under the hook portion of hammer (Fig. 24).
(3) Fix Spring section with Bind PT3x16 Tapping screw and mount driver guide, driver, and driver guide cover
to Housing R. (Fig. 25)
Fig. 24
Roller
(The position
is lower than
that of the hook
portion of hammer)
Fig. 25
Repair
P 7/ 15