Filter
Top Products
How
to
make
joints
To
make joints, proceed as follows:
1.
Fit
the two workpieces together as they will appear in the finished joint position.
Corner Joint
T-Butt Joint
4iter Joint
Edge-To-Edge
Joint
<
I I
rame Joint
2.
Mark the center of the intended biscuit slots on the workpiece using a pencil.
(Note)
The center
of
slots should be at least
50
mm
(2")
from the outer edge
of
the workpieces.
*Allow
100
mm
-
150
mm
(4"
-
6")
between slots in multiple biscuit application.
7