Filter
Top Products
6.
Align the center mark on the base with
the pencil line on the workpiece.
7.
Switch on the tool and gently push
it
forward to extend the blade into the workpiece.
8.
Gently return the tool to the original position after the adjusting screw reaches the stopper.
9.
For Corner Joint and T-Butt Joint only
Clamp the horizontal workpiece to the workbench.
For Corner Joint
For Miter Joint only
Clamp the other workpiece to the work-
bench with the mitered edge facing up.
For Frame Joint and Edge-To-Edge Joint only
Clamp the other workpiece to the workbench.
For Frame
Joint
For Edge-To-Edge-Joint
7-L
9