Filter
Top Products
. A complete Parts List is available on-line at www.MillerWelds.com
OM-225 311 Page 29
224 940-D
3/30
3.5/45
2.5/28
2.5/35
3/30
3.5/45
4.5/35
5/22
5/40
5/30
5.5/45
5.5/30
4.5/40
4/55
2/30
2/25
6/50
8/65
6.5/40
5.5/80
5.5/50
5.5/50
6/40
7.5/85
7/70
10/90
10/45
10/60
10/30
10/45
8/40 10/32
10/80
10/605/35
3.5/40
6/35
5.5/55
5/45
4.5/65
3.5/25
6.5/70
6/60
NOTE: Settings are approximate. Adjust as required.
“−−−” Means not recommended.
“*” Thicker materials can be welded using proper technique,
joint preparation and multiple passes.
IMPORTANT: Match drive roll groove to diameter of wire being used.
Set Tension knob setting to 3 at start. Adjust tension
per instructions in the manual.
224 940−D
10/753/702/60
10/703.5/65
3/60
with optional Spool Gun, Order part no. 300371