Filter
Top Products
. A complete Parts List is available on-line at www.MillerWelds.com
OM-225 311 Page 33
225 229-F
225 229−F
1.5/20 2/25
3.5/25
3/15
1/15
2.5/30
3.5/25
3.5/20
3/12
3.5/60
5/60
5.5/35
4/45
4/70
6/100
6/40
7/85
6/55
6/65
6.5/65
6.5/50
6.5/75
10/75
10/55
5.5/45
4.5/50
3.5/35
4.5/30
4.5/35
1.5/15 2/20 2/20
2.5/30 3.5/40 4.5/55 6/75
6/80 10/95
3/35
3.5/453.5/30 6/95
5/804.5/704/50
2/70
10/1008/955/704/702/70
10/908/905/654/602.5/65
3.5/283.5/25
7.5/956/855/705/604/45
2.5/20
7.5/806/654.5/50
4/40
3.5/25
2/12 2/15 2.5/20 4.5/45 6/55 6.5/60 10/703.5/303/25
4/40
4/25
4/20
2/20
1/10 4/35
6/55
7/60 10/653/25
2/15
3/452/25
NOTE: Settings are approximate. Adjust as required.
“−−−” Means not recommended.
IMPORTANT: Match drive roll groove to diameter of wire being used. Set Tension
knob setting to 3 at start. Adjust tension per instructions in the manual.
.045” (1.2 mm) #202926
.024” (0.6 mm) #220179
.030” (0.8 mm) #220179 #202926
.035” (0.9 mm) #220179 #202926
4/25 6/35 7/40 10/453/152.5/10
Thicker materials can be welded using proper technique,
joint preparation and multiple passes.
with optional Spool Gun, Order part no. 300371