Filter
Top Products
Chapter 2: Installation
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 14
Installation Overview
Part A: Cabling – Connecting the FaxFinder to Power,
Phone Lines, and Ethernet
Summary: Place the FaxFinder in a convenient location, and then connect it to your AC power outlet and
Ethernet.
1. Connect FaxFinder to AC Outlet.
A. FF120/220 Power. Plug the DC power transformer into a power outlet or power strip. Secure the
other end to the Power Receptacle on your FF120/220 FaxFinder. Secure the power cord to the
connector with the lock nut. (Builds of FF120/220 for outside of North America have a 2-piece
power connection.)
Note: The FF120 & 220 have a reset switch in lieu of a power toggle switch. Using a straightened
paper clip to push the recessed button will perform a hardware reset. This is only necessary
if the unit becomes unresponsive.
Caution: Use only the DC power transformer supplied with the FaxFinder. Use of any other
transformer voids the warranty and can damage the FaxFinder.
B. FF420/820 Power. Connect the power cable between the unit and a power outlet.
Power
C
a
b
le
Receptacle
LINE 1
LINE 2 LAN 1
CONSOLE
RESET
Lock Nut
FF-120/220
COMMAND
ETHERNET
87
5
312 4
6
FF-420/820