Filter
Top Products
14.3 Listing of Global Messages
Error
Code
Message Description
Canceling and Re-
pairing Method
129
2000
PLC ERROR 001 At most 152 different messages can be
sent by PLC. The message texts are
optional. In case no text is added by the
programmer of PLC, message PLC
ERROR ijk is displayed.
For the list of messages and the descrip-
tion of messages turn to the machine tool
builder.
The message is can-
celed on the basis of
the PLC program.
For information on
clearing the mes-
sages turn to the ma-
chine tool builder.
2001
PLC ERROR 002
2002
PLC ERROR 003
...
...
2150
PLC ERROR 151
2151
PLC ERROR 152
2500
PLC MESSAGE 1 At most 8 different indexed messages can
be sent by PLC. The messages texts are
optional. In case no text is added by the
programmer of PLC, text PLC MESSAGE
ijk is displayed.
The message can be indexed with maxi-
mum 4 digits following the messages.
For the list of messages and the descrip-
tion of messages turn to the machine tool
builder.
The message is clear-
ed on the basis of
the PLC program.
For information on
clearing the mes-
sages turn to the ma-
chine tool builder.
2501
PLC MESSAGE 2
2502
PLC MESSAGE 3
2503
PLC MESSAGE 4
2504
PLC MESSAGE 5
2505
PLC MESSAGE 6
2506
PLC MESSAGE 7
2507
PLC MESSAGE 8
3000
MIRROR IMAGE IN G51,
G68
If mirror image (G50.1, G51.1) is
switched on or off in the switched-on-state
of scaling (G51), or rotation (G68).
The message is can-
celed by RESET
key.
3001
VALUE EXCESS X,Y,...F If coordinate or feed data exceeds value
range permitted.
The message is can-
celed by RESET
key.
3002
PLANE SELECTION IN
G68
If plane selection (G17, G18, G19) is
executed in the switched-on-state of
coordinate rotation.
The message is can-
celed by RESET
key.
3003
COORDINATE ADDRESS
G68
If an axis outside the selected plane is
specified in command G68 when giving
the center of rotation.
The message is can-
celed by RESET
key.
3004
MISSING REFERENCE
POINT
If reference point return has not been per-
formed before absolute movement is pro-
grammed on an axis.
The message is can-
celed by RESET
key.
3005
ILLEGAL G CODE If no function or custom macro call has
been defined for a G code referred to or
two or more conflicting G codes in a block
are specified.
The message is can-
celed by RESET
key.