Filter
Top Products
2 General Operating Knowledge
18
further items after Service screen menu, those would be shown by pressing the screen menu
key , until the first part of screen menu is returned.
The number seen in the bottom right corner of menu field indicates the softkey number of the
appropriate menu field and not the line number of the menu within the screen menu (for more
see parameter SFNUMB ).
By pressing the softkey of the active screen menu, its menu appears. On the basis of the
previous example the following menu appears by pressing the Position softkey:
Absolute
1
Relative
2
Machine
3
End
4
Overall
5
The Position menu consists of five items, therefore starting with the sixth menu field the
forthcoming ones stay blank (for those have no meanings at all).
Suppose, that the second - and last - level of the screen menu is in effect. Here by pressing the
softkeys the caption of the appropriate menu field becomes highlighted and the selected screen
appears immediately. On the second level there is no Page softkey, because there the desired
screen can instantly be selected. If there is not enough room for the screens forming a screen
menu in the menu bar, the subsequent parts can be brought in by pressing the screen menu key
. If the last menu item of the screen menu is already in the menu bar, then by pressing
screen menu key the first level of the screen menu is returned.
The following menu items (screens) can be selected from the screen menus:
Position
Absolute
1
Relative
2
Machine
3
End
4
Overall
5
Cartesia
n6
7890
Check
Text
1
Function
2
Last
3
Active
4
Oprtr`s
panel 5
Message
6
7890
Program
Director
y1
View
2
Edit
3
Block
input 4
FEW
5 6 7 890
Offsets
Work
offsets 1
Tool
offsets 2
W. offs.
measur 3
T. leng.
measur 4
Rel. pos
offsets 5 6 7 8 9 0
Graphics
Graphic
param 1
Draw
2 3 45
6
7890