Filter
Top Products
3.6 SETTING Screens
53
The below table contains the codes of the appropriate functions:
Function Code Function Code
General Security Gate
Generated
work offsets
15962
open new program
95148
relative position
15962
delete program
95148
tool offsets
15962
edit program
95148
tool pot table
15962
load program
95148
tool life table
15962
save program
95148
timers and counters
7895123
protect program
7895123
PLC table
15962
DNC channel
Generated
#100 macro variables
95148
user’s parameters
7895123
#500 macro variables
95148
parameters
Generated
run in auto menu
456852
PLC program
Generated
run in MDI menu
357159
service operations
Generated
Symbol = (cursor) can be moved to the desired data security service within a column by means
of buttons and . If columns are to be switched use buttons , .
If action menu button is pressed the following actions are offered:
Open
1
Close
234567890
Open action: If a locked function is to be opened and security key is at disposal move symbol
= (cursor) to the function. Turn the data security key to enable position on the machine
than press Open
button.
If no data security key is on the machine move symbol = to the function to be enabled
than press Open button.
In this case, provided the function to be opened has fix code, message
Code: _ _ _ _ _ _ _ _
appears in the bottom line. After entering the appropriate fix code taken from the above
table the data input can be closed with the help of button and the function is
enabled.
If the function has generated code, the following message is displayed in the bottom
line:
nnnnnnnn code: _ _ _ _ _ _ _ _
where nnn is an eight-digit number. Start Decoder program on PC and enter the digits
seen on control screen. The key code (a 5 digit number) generated by Decoder
program must be entered from numeric keyboard to control. After the appropriate code