Filter
Top Products
Replace the battery as follows:
1. Open the lid using a suitable tool.
2. Replace the battery with a new one.
Recommended battery: CR2025 or equiva-
lent
Make sure that the ⊕ side faces the
bottom case.
3. Close the lid securely.
4. Push the keyfob button two or three times to
check its operation.
See a NISSAN dealer if you need any assistance
for replacement.
If the battery is removed for any reason
other than replacement, perform step 4
above.
¼ Be careful not to touch the circuit board
and the battery terminal.
¼ An improperly disposed battery can
harm the environment. Always confirm
local regulations for battery disposal.
¼ The keyfob is water-resistant; however,
if it gets wet, immediately wipe it com-
pletely dry.
¼ When changing batteries, do not let
dust or oil get on the keyfob.
FCC Notice:
Changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules and RSS-210 of Industry
Canada.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received, in-
cluding interference that may cause undes-
ired operation of the device.
SDI1608
KEYFOB BATTERY
REPLACEMENT
Maintenance and do-it-yourself 8-25
੬ 06.7.20/Z33-D/V5.0 ੭