Filter
Top Products
seatback tilt switch. While the switch is held
down, the seatback will move backward to the
original position that was last selected using the
reclining switch (located on the seat cushion).
Release the switch to stop the movement.
Operation conditions:
The power seatback tilt switch does not activate
under the following conditions.
¼ when the passenger seat sliding/reclining
switches on the seat cushion are being op-
erated.
¼ when the seat tilt cancel switch is in the
CANCEL position. (See “Seatback tilt cancel
switch” later in this section.)
¼ when the passenger seat belt is fastened.
¼ when the vehicle speed reaches 4 MPH (7
km/h) and more.
The automatic tilting/reclining movement will be
stopped:
¼ when any of the above 4 conditions occur.
¼ when the power seatback tilt switch (top or
bottom) is pushed again.
¼ when the seatback is moved with the soft top
open/close operation.
When this interruption occurs, you cannot move
the seatback backward from the stopped posi-
tion with the power seatback tilt switch. Use the
reclining switch (on the seat cushion) to select
the seatback position.
Seatback tilt cancel switch:
When the seatback tilt cancel switch
k
C
is
pushed to the CANCEL position, the
tilting/reclining operation using the power seat-
back tilt switch
k
B
will be cancelled. Only the
sliding/reclining switches (located on the seat
cushion) are operational. Push the seatback tilt
cancel switch to the AUTO position to reactivate
the power seatback tilt switch.
This cancel switch is linked with the automatic
passenger seatback tilt function of the soft top
operation. See “Soft top” in the “3. Pre-driving
checks and adjustments” section.
SSS0274
Roadster models — Type B
SSS0275
1-8 Safety — Seats, seat belts and supplemental restraint system
੬ 06.7.20/Z33-D/V5.0 ੭