Filter
Top Products
Tire and loading information label
k
1
Seating capacity: The maximum
number of occupants that can be
seated in the vehicle.
k
2
Vehicle load limit: See loading infor-
mation in the “Technical and con-
sumer information” section.
k
3
Original size: The size of the tires
originally installed on the vehicle at
the factory.
k
4
Cold tire pressure: Inflate the tires to
this pressure when the tires are cold.
Tires are considered COLD after the
vehicle has been parked for 3 or
more hours, or driven less than 1
mile (1.6 km) at moderate speeds.
The recommended cold tire inflation
is set by the manufacturer to provide
the best balance of tire wear, vehicle
handling, driveability, tire noise, etc.,
up to the vehicle’s GVWR.
k
5
Tire size — refer to “Tire labeling”
later in this section.
k
6
Spare tire size or compact spare tire
size (if so equipped).
SDI1948
8-32 Maintenance and do-it-yourself
੬ 06.7.20/Z33-D/V5.0 ੭