Filter
Top Products
RTS, MATE/HUB WIRING
RJ-11 modular jack connects RTS, the optional
external battery temperature sensor.*
RJ-45 jack connects MATE or HUB to FX using
CAT5 cable.**
*When a HUB is used, plug the RTS into the
Master FX, which should be plugged into
HUB’s Port 01. The RTS cable is folded and
routed under the AC Wiring Compartment’s
Lexan cover, tting into a small indentation in
the aluminum casting between the battery
terminals. ONLY USE THE OUTBACK RTS; OTHER
BRANDS YIELD INCORRECT READINGS.
**If the system has multiple FXs and/or OutBack
Charge Controllers, a HUB is required.
LED Color 12 VDC 24 VDC 48 VDC
Green O (FULL) 12.5 or higher 25.0 or higher 50.0 or higher
Yellow O (OK) 11.5 to 12.5 23.0 to 25.0 46.0 to 50.0
Red O (LOW) 11.5 or lower 23.0 or lower 6.0 or lower
LED Color LED Action LED Indicates
Green
O
Solid GREEN Inverter ON
Flashing GREEN Search Mode or Slave Power
O Inverter OFF
Yellow
O
Solid YELLOW AC Source is Connected
Flashing YELLOW AC Input Live—Waiting to Connect to the FX
O No AC Input Present
Red
O
Solid RED Error—An Error Message will be automatically displayed
on the MATE
Flashing RED Warning—A non-critical fault happened to the FX; the
MATE can access this info.
17
Status Lights
Battery Lights
G
R
E
EN
Y
EL
L
O
W
R
ED