Filter
Top Products
23
SERIES/PARALLEL QUAD FX SYSTEM
• All AC wiring from the AC source and to the AC loads must collectively handle 120 amps AC or more.
• All other AC wiring must handle a capacity of 60 amps AC (Mobile FX AC wiring must handle 30
amps).
• This system can continuously power eight 14.4kW of loads depending on which model is used.
• Connecting more power than the continuous rating of the FX may cause breakers to trip or the FX
to shut o its AC output.
• A HUB, MATE, and FW-X240 must be connected to successfully stack these FXs in series/parallel.
NOTES:
• Program the lowest-installed FX as the Master (1-2ph MASTER), the rst Slave as an Outback L1 Slave