Filter
Top Products
Getting Started with Your Polycom® CX700 IP Phone
1 - 5
below, then plug one end of in the country specific power cord into the
power adapter and the other end into an available AC outlet.
The phone will begin to power up.
For more information on logging in, refer to Logging in on Your Polycom
CX700 IP Phone on page 1-7.
Adjusting the Phone Base
To adjust the base:
1. Push the button on the back of the Polycom CX700 IP phone to adjust the
viewing angle.
2. Select an angle that best suits you by moving the base up or down.